Through the interchangeable apparatus, easy and precise bending process is performed on pipes (dimensions of 1-4), max.120 mm width NPU profile and 100 × 100 angle brackets.
Roll and radius bending operations are performed on sheets up to 30 mm thick and 3 meters wide. Through the hydraulically opening head, removing the bent parts accelerates the work flow.
Through the variable current settings, plasma cutting is performed on sheets from 0.5 mm to 30 mm. Pipe cutting up to a maximum of dimension 12, wolf mouth and hole punching operations are performed on the pipe along with the pipe cutting unit. In addition, the welding bent is opened on the sheets with the welding bent opening apparatus.
It can clean the rough and rusty surfaces of flat sheets with a maximum width of 2000 mm by sandblasting in SA 2 ½ quality and 40 µ depth with grit thanks to 6 tribunes.
The double-sided shopprimer painting process of surface cleaned flat sheets with a maximum width of 2000 mm is done quickly and homogeneously with a maximum thickness of 20-30 (µ).
Thanks to the drying unit integrated into the paint unit, 9 minutes / piece drying time can be obtained at 22⁰ C ambient temperature.
Packages are cut up to 650 mm width in pipes, profiles and similar steel products.
Inclined cutting up to a width of 350 mm is performed on pipes, profiles and similar steel products.
“It can cut square and round irons which are maximum Ø 45 mm and flat sheets of maximum 12mm thickness by press cutting process up to 450 mm width.
“
In addition, it can perform 90 ⁰ cutting at maximum 120 × 120 sizes and inclinedpress cutting at maximum 70 × 70 sizes.
It can perform notching from flat sheet and profile material with a maximum width of 52 mm and a depth of 90 mm.
Thanks to its modular suction cups, it can lift and carry flat sheets of maximum 2000 × 9000 mm up to 3000 kg.
